Deciding Upon Down-To-Earth Strategies For 6G Welding

There are various forms of welding techniques used today and one of the most complicated and challenging ones is 6G pipe welding. This welding technique typically involves joining cylindrical metal tubes employing a shielded metal arc welding technique or perhaps a gas shielded arc welder. There are many challenging processes to learn to become a professional welder and 6G welding is easily the most complex and hard to discover (notice: you can learn more via this site).

To become a professional and proficient welder, you need to have the ability to tackle different tasks and be ready to become knowledgeable about a number of materials in various thicknesses. There are various challenges relevant to 6G pipe welding with the main ones regarding the positions you ought to be in for you to get the job done along with the skills you need to master the welding techniques needed that you can attain ideal results. Fortunately, people who do well at 6G welding generally earn over welders that are proficient at simpler welding techniques. And that’s for the reason that 6G welding technique is very difficult to learn.

What’s 6G Welding?

The “G” in 6G signifies the weld type, which is actually a groove weld whilst the “6” identifies the position of the welded pipes. Groove welds are joints that join two metal tubes the location where the space involving the two is full of welding material.

A common welding process that’s used when welding pipes is open root welding. Using this type of technique, the welding joint doesn’t use a tacked backing plate. This procedure might be a bit tough to master considering that the weld is now being made across a gap. To protect yourself from making mistakes and messing within the job, welders must employ the right welding techniques.

One important thing that complicates pipe welding is the fact moving around the pipe to gain access to the gap will frequently mean that you block your view using one of the hands sooner or later. Besides that, it’s a welding technique that will need you to use both of your hands to complete the task. Consequently, it’s vital that you spend some time to find out which of your respective sides will be the good side and which is the bad one in relation to pipe welding – and that’s correlated to whether you’re left-handed or right-handed.

Working on the left-hand side of the tube will likely be challenging for right-handed people, and vice-versa. Identifying this obstacle early will enable you to learn ways to overcome it to actually don’t ruin your welds.

Working with Pipe Welding Positions

Becoming skilled at utilizing the right positions will ensure you always obtain the best results when pipe welding. The program of letters and numbers you see on pipes is a sort of code that indicates the level of joint and position it is necessary to use.

You can find four welding positions and these are 1G, 2G, 5G, and 6G.

The 1G position is actually a flat welding position that’s not used often. Though it’s still vital that you learn it as a a welder. 1G welding is actually flat-welding considering that the tube is lying about the curved edge (on its side) and can be rotated during welding.

The 2G position, on the flip side, is fixed – the pipe being welded can’t be turned. However, as it is added to its base, welding the pipe becomes easier because it is stabler and sturdier.

Just like the 1G position, 5G position means the pipe is horizontal but can’t be moved as it’s fixed in position. In this instance, you’ll ought to weld the pope in a variety of positions, including overhead. Other positions used with this position include vertical down and vertical up.

One of the most challenging welding position will be the 6G welding position. That’s for the reason that pipe being welded is in a 45-degree angle. 6G welding will need you to pay very close attention to both your bad and good side since welding without blocking your view using one of the hands is virtually impossible.

If you see the letter “R” in welding codes, which means that the welding position is actually a restricted one – and that’s either visually or physically.

The 6G Welding Position

One important thing that complicate 6G welding would be the fact considering that the welds are vertical, molten filling metal tends to flow downward in the joint cavity during welding. To prevent this, you need to practice a lot. Also, given that both pipes are horizontal to one another with one tube positioned at the 45O angle towards the other, finding the right position like a welder can be difficult. Using this type of welding technique, there are actually yourself having to use different body positions as well as other skills to perform your main goal.

6G Welds: What are They User For?

Groove welds are employed on all types of joints except lap joints (i.e., joints constructed from overlapping tubes.) While it’s rare for certified welders to encounter pipes which require a 6G weld during their career, the welding position is often used like a pre-employment test.

The 6G Welding Test

Also called the Arkansas Bellhole Tests, the 6G welding test is used to weigh the relevant skills of the welder. The exam is very stringent considering that the welder needs to use various welding techniques (horizontal, vertical, and flat welding) to accomplish a 6G weld. These welds are usually created by welders in trades such as steel working, which require skilled welding abilities. When a welder can make good 6G welds, they are tested on it and have certified after they pass the test.

6G Welding Certification

Those planning to become certified pipe welders ought to move through a, somewhat, demanding process as they should prove that they are not merely good with welding machines but that they can may also produce quality penetration and can work in restricted spaces with restricted views. Besides that, a prospective welder must pass an evaluation regarding their all-position welding technique.

You will discover more regarding the 6G welding certification at this site:

To acquire a 6G certification, you will need to attend an effective welding school, that may be costly and time-consuming. However, in the long run, you’ll have gained extra skills that enhance your career like a welder.

6G pipe welding is probably the toughest weld certifications tests a welder can pass as the pipe is immovable and also at a 45-degree angle. To be 6G certified, you must prove that you could weld pipes in every positions – overhead, horizontal, and vertical – and you are proficient at welding with both of your hands.

Certification Sources

In The United States, 6G certification is available with the American Welding Society along with numerous other organizations that provide certification tests. The American Welding Society lists over 80 accredited weld testing institutions where applicants may take 6G certification tests. The Society’s certification application includes a weld testing section that has to be done by one among its Accredited Testing Facilities.

Some 6G pipe welder certification providers in the united states offer training to aid welders pass their certification test. As an illustration, AVTEC offers certification when a welder has completed its 75 events of training and 450 hours welding degree program. Industrial Training Solutions, on the flip side, sponsors a 6G welder certification which involves 120-hours of hands-on welding instructions in preparation to the welding certification exam.

Costs and Requirements

Each welder’s certification program requires its applicants to satisfy specific requirements. As an illustration, some facilities, like Industrial Training Solutions, will require their applicants to obtain some numerous years of welding experience (2 years in this instance) before they may enter in the program. Others will require that you hold, at a minimum, a 3G welding certification.

It’s worth noting that the expense of acquiring 6G pipe welding certification varies based on the institution offering the certification. The AWS charges about $35 for each and every certification, while the expense of testing is catered for by applicants. Most programs cost around $4,000 to $5,000 – and this includes testing and training.

How Much Do 6G Welders Make?

The typical hourly rate for 6G welders in America is $24.91/hour though it might arrive at as much as $40/hour or as low as $17/hour, for the way experienced and skilled a welder is along with the state they reside. A skilled 6G welder can earn as much as $98k/year (including commissions, bonuses, and profit-sharing) should they be great at what they do and help a major company.


Mastering the skill of pipe welding may take your career to great heights. However, it means learning some of the most complicated and challenging welding skills and methods from the welding industry. However, if you devote the effort and pass the certifications, you will get gained an incredibly-prized skillset that is desired by some of the top employers from the metalworks industry. While 6G welding doesn’t require any special or extra equipment, it’s a welding procedure that will not be to the half-hearted. If you are considering being a professional and reputable 6G welder, find the best welding school, make the effort, and gain a 6G welding certification. Even though it will probably be the greatest challenge you may have ever faced, learning how to professionally 6G pipe weld improves your odds of being a much sought-after professional welder.

Leave a Reply

Your email address will not be published. Required fields are marked *